Do you need a precision microinjector with an integrated pressure source for injections in the picoliter range? WPI’s new MICRO-ePUMP, which is comparable to the Ependorf Femtojet, is a portable solution for injecting DNA, RNA and proteins, as well as pre- and post- implantation in embryos.

The ATC2000 is a low noise heating system for maintaining animal body temperature during expirimental procedures. Here we show you how to use the adaptive mode on the ATC2000 system.

The ATC2000 is a low noise heating system for maintaining animal body temperature during experimental procedures.

The DMF1000 is a microprocessor-controlled microforge designed for fabrication of both small patch clamp glass pipettes and larger injection pipettes. The DMF1000 can be used for polishing patch clamp pipettes, microforging holding pipettes, microforging beveled injection pipettes, and for calibrating pipette tips for microinjection. Here we will show you how to configure the DMF1000 controller.

The DMF1000 is a microprocessor-controlled microforge designed for fabrication of both small patch clamp glass pipettes and larger injection pipettes. The DMF1000 can be used for polishing patch clamp pipettes, microforging holding pipettes, microforging beveled injection pipettes, and for calibrating pipette tips for microinjection. Here we will show you how to install the microforge filament on your microscope.

Do you want to take the next step in your CRISPR-CAS9 projects, making the injection of biomolecules in your cell lines more efficient? You can now increase the viability of injected embryos with WPI’s MICRO-ePORE, which offers improved repeatability and functionality for pinpoint cell penetration for targeted microinjections in transgenesis.

The PUL-1000 is a microprocessor controlled, four-stage, horizontal puller for making glass micropipettes or microelectrodes. Here is how to run a program that will pull two identical microelectrodes.

The PUL-1000 is a microprocessor controlled, four-stage, horizontal puller for making glass micropipettes or microelectrodes. Here is a quick overview to get you started qui

The PUL-1000 is a microprocessor controlled, four-stage, horizontal puller for making glass micropipettes or microelectrodes. Here we will see how to load a piece of glass into the carriage.

The PUL-1000 is a microprocessor controlled, four-stage, horizontal puller for making glass micropipettes or microelectrodes. We will show you how to run a glass softening test.

Let’s look at the PUL-1000, a microprocessor controlled, four-stage, horizontal puller for making glass micropipettes or microelectrodes. Here we will examine the design of the unit.

NanoFil™ is a unique low volume gas tight syringe developed for improved microinjection in mice and other small animals. Here we show you several ways in which the NanoFil can be used for making injections. You can install the syringe on WPI’s UMP3 UltraMicroPump, using SilFlex tubing and a holder, so you can accurately inject by hand. You can install it in a stereotaxic frame. You can also directly inject by hand.

NanoFil™ is a unique low volume syringe developed for improved microinjection in mice and other small animals. Here we'll show you how to install your needle in a way that prevents damage to the gasket and keeps your needles straight.

NanoFil™ is a unique low volume syringe developed for improved microinjection in mice and other small animals. Using a UMP3 UltraMicroPump combined with the syringe allows you to make repeatable injections in the nanoliter range. Here we'll show you how to install a NanoFil Syringe on the UMP3 UltraMicroPump.

NanoFil™ is a unique low volume syringe developed for improved microinjection in mice and other small animals. During our field trials, the 35-gauge needle was scientists’ most popular and preferred NanoFil tip. The combination of its strength, length, durability and clogging resistance creates a solid balance.

NanoFil™ is a unique low volume gas tight syringe developed for improved microinjection in mice and other small animals. RPE and IO kits are specially designed for “hands-free” and oil-free Gas Tight Injection System. Originally developed for retinal pigment epithelium and intraocular injection, they can also be used for other applications.

PUL-1000 is a microprocessor controlled, four-stage, horizontal puller for making glass micropipettes or microelectrodes used in intracellular recording, patch clamp, microperfusion and microinjection. The PUL-1000 is capable of producing a vast array of pipette shapes, such as a long graduated taper, a short graduated taper and a short taper bee stingers. Here's a quick introduction the PUL-1000 research puller.

NanoFil™ is a unique low volume syringe developed for improved microinjection in mice and other small animals. NanoFil needles are specially designed with a small outside diameter and spear point for shallow penetration and to cause the least amount of tissue damage. 

NanoFil™ is a unique low volume syringe developed for improved microinjection in mice and other small animals. It comes in both 10 and 100 microliter volumes and can be paired with a UMP3 UltraMicroPump for making accurate microliter injections. NanoFil stainless steel needles range in size from 33 to 36 gauge.

The M3301 is a popular micromanipulator used for laboratory research. Here we will show you how to mount a microelectrode holder on the M3301 Micromanipulator. The procedure is very similar for most manual micromanipulators.

Pulling micropipettes or microelectrodes is a science and an art, requiring some finesse. Here we discuss the five major factors which can affect the shape of a pulled glass micropipette or microelectrode.

Magnetic stands act as an invaluable extra hand around the laboratory to hold an electrode, digital dials or tools. The base houses a strong magnet which can be activated by turning the switch. Position the magnetic stand on a weighted steel base plate or metal desk and rotate the dial counter-clockwise to engage the magnet. We offer multiple styles of magnetic stands, but these videos show a couple options.

The PV850 Injector is designed to simplify intracellular injection and a variety of other microinjection tasks. The PV850 uses regulated air pressure for injecting cells with fluid. Injected volumes range from picoliters to nanoliters. The port supplies positive pressure for high-pressure ejection maximum of 87 PSI.