Selling fast!
Get yours while you can.
Coriolis Premium Microfluidic Flow Sensor
Regular price
$8,548
Sale price
$8,548
Regular price
Unit price
per
505870
Regular price
From $6,902 - $8,719
Sale price
From $6,902 - $8,719
Regular price
Unit price
per
Couldn't load pickup availability
Prices valid in USA, Canada, and PR only.
The Rolls-royce of flow sensors
High accuracy microfluidic flow sensor -- unmatched up to 0.2% accuracy (2% for standard 505867 (BF1)). Featuring a broad flow rate range, measuring from µL/min to mL/min using a single sensor. The Coriolis Premium Microfluidic Flow Sensors are compatible with liquid and gas, supporting use for multiple fluidic sample introduction with straightforward plug-and-play integration, without the hassle of calibration.
ACCESSORIES
Details
Details
Options
| Order code | Elveflow Cross Reference SKU | Detail |
| 505867 | BFS-1 | Coriolis Premium Microfluidic Flow Sensor, 0.1g/h - 200g/h, 2% Accuracy |
| 505868 | BFS-1+ | Coriolis Premium Microfluidic Flow Sensor, 0.1g/h - 200g/h, 0.2% Accuracy |
| 505869 | BFS-2 | Coriolis Premium Microfluidic Flow Sensor, 1g/h - 2000g/h, 0.2% Accuracy |
| 505870 | BFS-3 | Coriolis Premium Microfluidic Flow Sensor, 30g/h - 30kg/h, 0.2% Accuracy |
Coriolis Based Flow Sensing
Specifically designed to suit microfluidic requirements, this flow rate sensor is based on the Coriolis principle. Its features make it the best and smartest solution for microfluidics applications:
- Extremely wide flow rate range
- High accuracy
- Direct mass flow measurement, independent of fluid properties
- Non-invasive measurement
- Additional density and temperature outputs
- Bi-directional measurement
- Fast response
Flow Rate Control
You can achieve flow control of your experiment by combining the Coriolis Flow Sensor with our pressure controller systems (OB1, COBALT). The Elveflow ESI software automatically adjusts the pressure to reach the required flow rate. Researchers who want to monitor the flow rate from their third party fluid driver can plug the flow sensor directly onto the computer.
User Friendly and Cost Effective
- Cost-effective solution: one sensor’s operating range covers the ranges of several standard microfluidic sensors.
- No calibration required
- Stand alone sensor: plug the sensor directly to your computer to measure the flow rate.
- Excellent repeatability and long-term stability
- Excellent accuracy: down to 0.2 % of measured value accuracy
- Easy to install and use
- Low risk of gas bubble inclusion
How does a Coriolis flow meter work?
A microfluidic Coriolis flow sensor contains a U-shaped loop which constantly vibrates. When a fluid flows through this vibrating loop, Coriolis forces are generated and bend or twist the tube. The extremely small tube displacements are detected by sensors and fed to the electronic board. Since the measured phase shift is proportional to the mass flow, the Coriolis flow rate sensor measures the mass flow directly. This measurement principle is very accurate, fast and, more importantly, independent of the properties of the fluid (density, temperature, viscosity, pressure, heat-capacity or conductivity).
Resources
Resources
Specifications
Specifications
