How to Properly Mix a Burstable Sylgard Twin Pack
Sylgard is a 2-part silicone elastomer with a very low dielectric constant, which makes it ideal for patch clamping and many other lab applications, especially in electrophysiology.
The twin pack is a convenient, single use sleeve containing both parts of the adhesive. We will show you how to properly mix the Sylgard Twin Pack.
- First, you will need safety glasses and gloves.
- Starting from the end, roll up the twin pack sleeve, pushing the fluid from the bottom into the top compartment.
- Press down gently to burst seal between the Part A and the Part B compartments.
- Then run the twin pack sleeve back and forth from end to end over the edge of a table at least 50-60 times, or 25 to 30 back and forth cycles, to mix the liquids.
- When the glue is thoroughly mixed, roll up the package from the bottom again and push the glue through the second seal. As you push the glue up, you can dispense it through the nozzle at the top.
- Please consult your local officials for proper disposal of your materials.
If you have any questions, just give us a call.
