Metal Electrode Selection Guide for Profile A

A heat treated tip is ideal for penetrating tough membranes. (It is not recommended for chronic implantation.) This process is performed using a microforge in which the heating element is positioned in close proximity to the tip in order to melt the Parylene-C distal to the exposed metal. It provides a smooth transition and produces better adherence of the Parylene-C to the metal. Both the KT and non-KT electrodes are heat-treatable. The heat treatment is applied only to the parylene coating. The heat melts the parylene so it feathers down close to the shank near where the tip is exposed. This removes the abrupt edge where the parylene has been removed to create the tip exposure. The purpose is to prevent the parylene from delaminating from the electrode during implantation into tissue which could catch on the edge. Heat treatment does not work well in chronic applications, because the feather edge is susceptible to fluid intrusion overtime, which will alter the impedance characteristics of the electrode unfavorably.

Use this comparison chart to choose Profile B Microelectrods. They are Tungsten Profile B, 76 mmlong wiht a 0.216 mm shaft.

Superior microelectrodes for outstanding extracellular recording — tungsten, iridium, platinum-iridium, and Elgiloy^®

WPI offers an array of metal microelectrodes. In this guide, we will look at introductory assortments, concentric electrodes, profile A, profile B and profile C electrodes. For basic information on these types of metal electrodes, see the Metal Microelectrode Basics page. Links to these related posts appear below this article.

Each of these assortment kits includes electrodes with different impedance within each style. Use an assortment kit to determine which electrode you need for your experiment. Each box includes the electrodes listed. There are no mix and match assortment kits.

Take a look at the variety of microelectrode holder available for your applications.