Micropipette Holders and Half Cells

WPI’s microelectrode holder-half-cells couple fluid-filled glass micropipettes to high input impedance amplifiers. A Ag/AgCl pellet (or a silver wire) molded into the holder body provides stable potential. Electrical connection is made via male 2mm pins or female 2mm sockets. The pipette may be mounted axially or at right angles to the holder. Pipettes are held with screw-caps or rubber gaskets (without caps). Filling WPI microelectrode holders with electrolytes containing chloride results in stable electrode potential. Suitable electrolytes include KCl, NaCl andCaCl2. Holders are supplied for standard WPI single capillary tubing of 1.0, 1.2, 1.5 and 2.0mm outside diameters. (Call WPI regarding custom designs for other glass diameters.) The holder style you select will depend on your experimental application, space, and instrumentation.

Hints for selecting and ordering micropipette holders

  1. Determine the required electrical connection on the holder. For example, if you wish to connect the holder to a 2mm pin, you should select a holder equipped with a 2mm jack. Most WPI probes require a holder equipped with a 2mm jack.
  2. Decide on the required alignment of the electrical connection (in-line with the glass pipette or at a right angle to it). Space considerations in your experimental setup and requirements imposed by other pieces of equipment typically determine which alignment is appropriate.
  3. Determine if you want to hold the glass pipette with a rubber gasket (MEH1S) or a screw-cap (MEH3S). Rubber gaskets offer easier insertion and removal of glass pipettes whereas screw-caps provide more secure mounts for micropipetters.
  4. Choose a holder with either a silver wire or a silver/silver chloride pellet for the metal/liquid coupling. Silver/silver chloride pellets provide a more stable, low-noise baseline which is important for low-noise DC recording. Pellets require the glass pipette and holder to be free of air bubbles to achieve a good connection. Silver wire holders are durable and are easier to use when the holder is equipped with a pressure port because the fluid in the pipette does not have to be filled to the top of the pipette to achieve a good electrical connection.
  5. Choose a holder equipped with a pressure port only when you want to pressure inject liquid from the pipette. Two types of ports are available: 2.0mm O.D. and standard “syringe-style” luer. The luer port is often recommended because it makes assembly and disassembly much easier. Quick-connect luer fittings for four common sizes of tubing (1/16", 3/32", 1/8", 5/32" I.D.) are included with each luer-equipped holder.
  6. Some non-WPI preamplifiers or headstages cannot be mounted on micromanipulators. In such cases, a holder equipped with a rod (MEH8) permits the holder to be conveniently mounted on a micromanipulator.
  7. Finally, remember to specify the O.D. of the glass you will be using when you place your order.

Keep in mind these general principles when considering the micropipettes:

  • MEH6RF/SF is designed primarily for use with the Model 900A Micropressure System.
  • EHB1 is for use in electrode beveling.
  • MEH3SW is for microtitration of chloride with a silver wire as the electrode and a solution of silver nitrate filling the holder.
  • MPH models do not contain Ag/AgCl half-cells and are used for pressure injection of substances through microelectrodes.
  • PicoNozzle, used for pressure injection with PV800 Series PicoPumps, includes an MPH6S holder — which may also be used to couple a micropipette to a syringe.
 Order code Custom Order Electric Connection Angle Connector Half-Cell Pressure Port Screw Cap Designed for WPI Products
EHB1

  Straight Male Wire No Port N/A MBS, 48000
EHBF
 
  Straight Female Wire No Port N/A MBS, 48000
MBMPH5-7

  ---- None None Female Luer w/Cap  
MEH145

Yes 45° Male Pellet No Port No Cap  
MEH1F45 

Yes 45° Female Pellet No Port No Cap 705, 773, 767, 721, FD223
MEH1R

  Right Male Pellet No Port No Cap  
MEH1RF

 Yes Right Female Pellet No Port No Cap 705, 773, 767, 721, FD223
MEH1S

  Straight Male Pellet No Port No Cap  
MEH1SF

  Straight Female Pellet No Port No Cap 705, 773, 767, 721, FD223
MEH2R

 Yes Right Male Pellet Male Luer w/Cap  
MEH2RF

 Yes Right Female Pellet Male Luer w/Cap 705, 773, 767, 721, FD223
MEH2RFW

 Yes Right Female Wire Male Luer w/Cap 705, 773, 767, 721, FD223
MEH2RW

 Yes Right Male Wire Male Luer w/Cap  
MEH2S

  Straight Male Pellet Male Luer w/Cap  
MEH2SF

  Straight Female Pellet Male Luer w/Cap 705, 773, 767, 721, FD223
MEH2SFW

 Yes Straight Female Wire Male Luer w/Cap 705, 773, 767, 721, FD223
MEH2SW

  Straight Male Wire Male Luer w/Cap  
MEH345

  45° Male Pellet No Port w/Cap  
MEH3F45

 Yes 45° Female Pellet No Port w/Cap 705, 773, 767, 721, FD223
MEH3FW45

 Yes 45° Female Wire Port w/Cap  
MEH3R

  Right Male Pellet No Port w/Cap  
MEH3RF

  Right Female Pellet No Port w/Cap 705, 773, 767, 721, FD223
MEH3RFW

 Yes Right Female Wire No Port w/Cap 705, 773, 767, 721, FD223
MEH3RW

 Yes Right Male Wire No Port w/Cap  
MEH3S

  Straight Male Pellet No Port w/Cap  
MEH3SBW

 Yes Straight Banana Wire No Port w/Cap ISO-80, ISO-DAM8A
MEH3SF

  Straight Female Pellet No Port w/Cap 705, 773, 767, 721, FD223
MEH3SFW

  Straight Female Wire No Port w/Cap 705, 773, 767, 721, FD223
MEH3SW

  Straight Male Wire No Port w/Cap  
MEH3W45

 Yes 45° Male Wire No Port w/Cap 705, 773, 767, 721, FD223
MEH6RF

  Right Female Pellet 2.0-mm Port w/Cap 705, 773, 767, 721, FD223
MEH6RFW

 Yes Right Female Wire 2.0-mm Port w/Cap 705, 773, 767, 721, FD223
MEH6SF

  Straight Female Pellet 2.0-mm Port w/Cap 705, 773, 767, 721, FD223
MEH6SFW

 Yes Straight Female Wire 2.0-mm Port w/Cap 705, 773, 767, 721, FD223
MEH7

  Right Male Pellet 2.0-mm Port w/Cap  
MEH7W

 Yes Right Male Wire 2.0-mm Port w/Cap  
MEH8

  Right Male Pellet No Port w/Cap  
MEH900R

  Right Male Pellet 2.0-mm Port w/Cap 900A
MEH900S

  Straight Male Pellet 2.0-mm Port w/Cap 900A
MPH1

  — None None Female Luer w/Cap  
MPH3

  — None None Male Luer w/Cap  
MPH4

  — None None 2.0-mm Port w/Cap  
MPH6P

Yes Right Male Pellet Female Luer w/Cap Piconozzle Kit (5430-XX)
MPH6R

Yes Right Male Wire Female Luer w/Cap Piconozzle Kit (5430-XX)
MPH6S

  — None None Female Luer w/Cap Piconozzle Kit (5430-XX)

 


47 products